Yue Whatt Trading Sdn Bhd
Lot 990, Batu 8 1/2,
Jalan Skudai,
81300 Skudai,
Johor, Malaysia.


Marmoline Super100 / Super100G

Previous 1 / 6 Next

Marmoline Super100 / Super100G Bonding Agents Cement


White cementitious  tile adhesive based on high-strength Portland white cement (I-52.5), reinforced with polymer resins, white marble aggregates and special additives to improve adhesion of tiles to difficult, low-absorbency surfaces. Suitable for cases where strong adhesion is needed, with improved anti-slip  properties of tiles and  an extended open time for application.


A reliable solution for demanding cases.  It achieves strong bonding of any kind of tiles such as  low-absorbency tiles, clinker-type tiles, natural and artificial decorative stones etc.,  indoors and outdoors.  Ideal for common floor or wall substrates such as concrete, aerated concrete, plaster,  brick wall  etc.   For adhesion on mosaics or old tile floors, you should first prime  the surfaces  with  MARMOLINE PRO CONTACT quartz filled adhesion primer.


  • High strength
  • Excellent adhesion
  • Moisture and frost-proof
  • Incomparable quality of raw materials
  • Easy to apply - excellent workability
  • No vertical slip of tiles 
  • Indoor and outdoor use

Application Mode

  • Check that the substrate is clean, dry and free from loose particles and other materials.
  • If the substrate is unstable or crumbles, then it is recommended  to prime the surface with MARMOLINE MST 11 acrylic water based primer
  • Mix with the necessary quantity of water, using an electric mixer at low speed, until a homogeneous, lump-free mixture is obtained.
  • Leave the mixture to set  for five to ten minutes and stir again
  • Spread with a notched trowel; choose the size according to the type of tile and the substrate.
  • Tiles must be fixed within 30 minutes  after applying the adhesive and definitely before it skins-over.
  • The adhesive remains workable in the pot  for 3 to 4 hours,  depending on the season, temperature and humidity of  the environment.  When the adhesive begins to set,  stir again without adding water.
  • Proceed to joint-filling after 24 hours, for floors   and 12 hours, for walls.
  • Mixing ratio: For a 25 kg bag, add  approximately 7 liters of clean  water
  • Application temperature +5°C  to +35°C


European Standard ΕΝ 12004 (C2TΕ)

  • Colour: White or Grey (G)
  • Adhesion strength (EN 1348) -Average values based on production control laboratory tests :  On concrete after 28 days: 1.6 Ν/mm²,   After heating at 70°C: 1.5 Ν/mm²,  In water: 1.5 Ν/mm²,  After 25 cycles of freezing - thawing: 1.3 Ν/mm². 
  • Slip (EN 1308): < 0.5 mm. 
  • Open time for application: 30 -40 minutes.
  • Time for minor corrections: 10 minutes.


  • Bags of 25 kg.
  • Palette of 1500 kg, 60 paper bags of 25 kg.
  • Plastic bags of 5 kg.
  • Cardboard boxes of 20 kg, 4 plastic bags of 5 kg.
  • Palette of 960 kg, 48 cardboard boxes of 20 kg.


12 months from the date of production in unopened package, in a dry place.


Approx. 2.5 – 4.0 kg/ m², depending on the size and type of tile.

For more information on Marmoline Super100 or Super100G, please click on the link below.

Marmoline Super 100 / 100G Information Sheet
Please leave your enquiry here, we will reply as soon as possible.
Company Name  
Product Interested  
Contact No.*  
Ship to Name  
Shipping Address  

Switch to Mobile Version